bellaxueer@tuta

2020 2021 2022 2023 2024

Contact us to buy FAG 23080MB bearing

1. Abrasive cloth can be used to clean the extended part of the shaft to remove rust or repair surface damage.

2. Loosen all screws on the first bearing unit.

3. Gently tap the edge of the sleeve of the bearing mounting ring until the locking system releases the shaft. Or you can tap the end face of the bearing inner ring on the opposite side of the mounting ring.

4. Loosen and remove the mounting bolts, and slide the bearing unit off the shaft.

5. Repeat steps 1 to 4 to disassemble the second bearing unit.

SKF ball bearings can be inserted into any SKF Y housing

To do this, in order to avoid damaging the edge of the sleeve, use a tube or wooden rod slightly smaller than the inner diameter of the bearing. At the same time, avoid excessive pressure on the bearings when turning in place. Make sure that the rotating torque is not transferred to the opening area of the bushing.

When installing the bearing, make sure that one of the relubrication holes on the bearing coincides with the relubrication groove in the bearing housing, and cannot coincide with the installation groove in the bearing housing, otherwise the grease will leak.

Eric Bearing Limited, Your trustworthy bearing supplier, providing Variety Top Brand Bearings. As a leading bearing distributor in Asia, ERIC BEARING LIMITED has high visibility in our customers, with our products being exported to over 100 countries. We have more than 8 years of export experience that can help you find the ideal purchasing solution. If you are looking for Spherical roller bearings or have any questions about bearings, please feel free to contact us.

2021-04-13 17:13:32, views: 32, Comments: 0