Preventive Effect of NSK Bearing Peeling Damage
Contact us for more details about
FAG QJ221N2 bearing
The peeling damage of the NSK bearing means that when the bearing rotates under load, the raceway surface or rolling body surface of the inner and outer rings exhibits scaly peeling due to rolling fatigue.
The causes of bearing peeling damage are: excessive load on the bearing; poor lubrication of the bearing or selection of inappropriate lubricants; poor installation, torque load, foreign body intrusion or water ingress; poor precision of the bearing box is too low, and the rigidity of the bearing box is uneven The deflection is large; rust, erosion points, scratches and indentation, etc.
Precautions: Check the size of NSK bearing load and the bearing used in the research again; select the appropriate lubricant to lubricate the bearing and improve the lubrication method; improve the installation method, strictly follow the installation procedure for installation, improve the sealing device, and shut down Anti-rust measures; check the accuracy of the shaft and bearing box, select bearings with high accuracy grade; check the bearing clearance to make it appropriate.
The vibration of the NSK bearing has a significant effect on the failure of the bearing. For example: peeling, indentation, rust, cracks, wear, etc. will be reflected in the bearing vibration detection. So by using special bearing vibration measurement devices (frequency analyzer and vibrometer, etc. ) The size of the vibration can be measured. The frequency distribution can be used to infer the details of the abnormal vibration. The measured values are different due to the use premise of the bearing or the installation position of the sensor, etc. Therefore, it is necessary to analyze and compare the measured values of each machine in advance to determine and judge scale.
2021-04-09 16:44:18, views: 183, Comments: 0
Post new
My articles
Deals Facebook
Google plus
Deals Twitter